Inline Paint Spray Booth

Model -900-***

Standard and Custom spray booths are designed to suit the timber profile and application required by the customer. The spray booths can be designed to spray timber from 19mm-wide to 1200mm-wide and 19mm-thick to 120mm-thick. Up to 5 spray heads are used depending on the timber profiles. The paint spray nozzles can be moved and positioned to suit most types of timber profiles. The control panel allows for full control and selection of the spray heads required to spray and the spray nozzles can be changed to change the fan width to optimize the coverage of the timber profile. The paint supply pump can be pneumatically powered or hydraulic powered. The system has up to 9  filters to ensure the least amount of tip blockages. There is a return pump to recycle the paint collected in the bottom of the booth back through the filter to the supply tank to reduce the wastage. With a speed control in feed and out feed conveyor paint, paint speeds can be up to 120m/min depending on the sizes of timber.

Custom-built Spray Booth

Standard Pre-Priming Spray Booth

Enquiries

For further information, please fax or email by returning details of the current glue system, controller type and relevant information on the processing machinery.

 

Please mark attention of Timber Projects Team at the address listed below:

 

       W A Stroud Limited

 

        14G Vega Place

        Mairangi Bay

        Auckland

        New Zealand

 

        Phone: +64 (9) 479 8860 ext 211

 

        Fax: +64 (9) 479 8861

 

        Email: [email protected]

 

        Web: www.strouds.co.nz